Installing CheckStar III ===================================================================== STEP-1: Make a backup copy of CheckStar III. Refer to your DOS manual for instructions. Put the original diskette in a safe place. Never run ANY program from the original disk. STEP-2: Insert a backup copy of CheckStar III in drive A. Type INSTALL and press ENTER key. STEP-3: HARD DISK USERS: --------------- Type CS and press the ENTER key to start the program. FLOPPY USERS: ------------- Get a new formatted floppy disk for the data. Insert backup copy of CheckStar III in drive A or drive B. Type CS and press the ENTER key to start the program. --------------------------------------------------------------------- Getting help: ------------- - As you will notice, CheckStar III is totally menu driven. We have spent much time to make this program easy to use. At first you may have some difficulty remembering where to find what you need. But give yourself some time and we are certain that within a few days, running the CheckStar III will be a piece of cake. There is a file called HELP.DOC on this disk. Some features are explained for first time users. To get a print out of this file, at the DOS prompt enter PRINT HELP.DOC and press the return key. Or you may always call us for anything you don't understand. - In any event, if you have questions or problems, don't hesitate to call us. Registering CheckStar III --------------------------------------------------------------------- You are permitted to use this program for a reasonable time to evaluate its functions and potential usefulness to you. If you wish to continue to use CheckStar III, a registration fee of $20 is required along with your name and address to: Salim Sindhi P.O.Box 55135 Houston, TX 77255 (713) 464-3713