159

PCBOARD PROMPTS MENU 2
──────────────────────────────────────────────────────────────────────────────

** CAUTION **

It  is  useful  to capture a session to a file before making  changes  to  the 
prompts,  since a misplaced capital letter, comma or any other character  will 
result  in ACCESS waiting for non-existent text. Furthermore, unless  you  are 
using  a modem with error correction such as MNP, keep the prompt as short  as 
possible  while still maintaining its uniqueness. The shorter the prompt  seg-
ment,  the less chance of noise becoming part of the prompt. Some prompts  are 
very similar to others, so be careful to avoid improper responses.

ACCESS  is  case  sensitive.  Make certain  you  have  maintained  the  proper 
upper/lower case of the prompt.


A: SUCCESSFUL TRANSFER PROMPT
──────────────────────────────────────────────────────────────────────────────

PCBoard's  response  when a file Upload/Download has been  completed  success-
fully.

ACCESS will proceed to the next event when it receives this prompt.


B: BEGIN TRANSFER PROMPT
──────────────────────────────────────────────────────────────────────────────

This is the last prompt before PCBoard begins a file transfer. 

ACCESS will respond to this prompt by initiating an Upload or Download.


C: WRONG FILENAME PROMPT
──────────────────────────────────────────────────────────────────────────────

If  you have entered a filename which is not found, PCBoard will respond  with 
this prompt. 

ACCESS  will then keep this filename in the download list for future  editing. 
ACCESS will respond with a <CR> and continue on to the next event.


D: UPLOAD DESCRIPTION PROMPT
──────────────────────────────────────────────────────────────────────────────

This is the prompt which PCBoard sends when asking for an Upload  description. 
ACCESS will send the Upload Description you entered in the Upload List.

For  multi-line  file descriptions, turn your text editor's wordwrap  OFF  and 
enter the complete description as a single line no longer than 360 characters. 
The text will be wrapped to the correct format by PCBoard.


E: DUPLICATE FILENAME PROMPT
──────────────────────────────────────────────────────────────────────────────

PCBoard's response when attempting to Upload a file already online. 

ACCESS will respond by keeping that filename in the Upload List for future edit- 
ing. ACCESS will send a <CR> to PCBoard and continue on to the next event.


F: EXCEED BYTE LIMIT PROMPT
──────────────────────────────────────────────────────────────────────────────

If you have downloaded more bytes than the System allows, PCBoard will respond 
with this prompt. 

ACCESS  will maintain the filename in the Download List for  future  downloads 
and continue on to the next event.


G: TRANSFER ABORT PROMPT
──────────────────────────────────────────────────────────────────────────────

If your transfer has been aborted, PCBoard will respond with this prompt. 

ACCESS  will maintain the file in the Download/Upload List for  future  trans-
fers.  ACCESS  will send a <CR> when it receives this prompt.  The  <CR>  will 
flush  any  unwanted characters from the PCBoard buffer which  may  have  been 
placed there by the protocol or the modem.


H: INSUFFICIENT TIME PROMPT
──────────────────────────────────────────────────────────────────────────────

If the attempted download will take more time than you have available, PCBoard 
will respond with this prompt. 

ACCESS  will  maintain  the file in the Download List  for  future  downloads. 
ACCESS will continue on to the next event.


I: PROCEED WITH LOGOFF PROMPT
──────────────────────────────────────────────────────────────────────────────

Although  ACCESS  sends the logoff command <G Y> to bypass  the  Proceed  With 
Logoff Prompt, ACCESS will recognize it and send a <Y>.


J: BATCH TRANSFER ENDED PROMPT
──────────────────────────────────────────────────────────────────────────────

Should  a Batch Protocol be inadvertently invoked, ACCESS will recognize  this 
prompt and proceed accordingly.


K: BATCH TRANSFER BEGIN PROMPT
──────────────────────────────────────────────────────────────────────────────

Should  a Batch Protocol be inadvertently invoked, ACCESS will recognize  this 
prompt and proceed accordingly.


L: BATCH GOODBYE AFTER TRANSFER
──────────────────────────────────────────────────────────────────────────────

Should  a Batch Protocol be inadvertently invoked, ACCESS will recognize  this 
prompt and proceed accordingly.


K: NOT REGISTERED IN CONFERENCE PROMPT
──────────────────────────────────────────────────────────────────────────────

Some Conferences require permission from the Sysop before you can access them. 
Should you request a File Transfer from such a Conference, ACCESS will  recog-
nize this prompt and continue on with the session. The file will be maintained 
in the File Transfer List and an entry will be stamped in the log file.


N: EXPERT MODE: OFF PROMPT
──────────────────────────────────────────────────────────────────────────────

If  ACCESS receives this prompt, it will respond with the command <X> to  turn 
Expert Mode ON.


O: FLAG, MORE PROMPT
──────────────────────────────────────────────────────────────────────────────

ACCESS returns a <CR> to this prompt.


P: FILE EXISTS. OVER-WRITE IT
──────────────────────────────────────────────────────────────────────────────

If ACCESS receives this prompt and over-write has been enabled for this  file, 
ACCESS  will respond with a <Y>, allowing the upload to  continue.  Otherwise, 
ACCESS  will respond with a <N> and the file will be removed from  the  Upload 
List.


Press <ESC> to return to the previous menu.


