HELP, Ampersand Commands (CTRL-S to Stop, CTRL-C to Cancel)

&An   n=0  Disable /ARQ Result Codes   &Pn   n=0  N.American Pulse Dial       
      n=1  Enable /ARQ Result Codes          n=1  UK Pulse Dial               
      n=2  Enable /Modulation Codes    &Rn   n=0  CTS Follows RTS             
      n=3  Enable /Extra Result Codes        n=1  Ignore RTS                  
&Bn   n=0  Floating DTE Speed                n=2  RX to DTE/RTS high          
      n=1  Fixed DTE Speed             &Sn   n=0  DSR Always On               
      n=2  DTE Speed Fixed When ARQ          n=1  Modem Controls DSR          
&Cn   n=0  CD Always On                      n=2  Pulse DSR, CTS=CD           
      n=1  Modem Controls CD                 n=3  Pulse DSR                   
&Dn   n=0  Ignore DTR                  &Tn   n=0  End Test                    
      n=1  Reserved                          n=1  Analog Loopback (ALB)       
      n=2  DTE Controls DTR                  n=3  Digital Loopback (DLB)      
&F    Load Factory Configuration             n=4  Grant Remote DLB            
&Gn   n=0  No Guard Tone                     n=5  Deny Remote DLB             
      n=1  550 Hz Guard Tone                 n=6  Remote Digital Loopback     
      n=2  1800 Hz Guard Tone                n=7  Remote DLB With Self Test   
&Hn   n=0  Disable TX Flow Control           n=8  ALB With Self Test          
      n=1  CTS                         &W    Store Configuration              
      n=2  Xon/Xoff                    &Xn   n=0  DCE Synchronous Clock       

Strike a key when ready . . .