HELP, S Register Functions (CTRL-S to Stop, CTRL-C to Cancel)

S0  Ring to Answer On                  S19 Inactivity Timeout (min)           
S1  Counts # of Rings                  S20 Reserved                           
S2  Escape Code Char                   S21 Break Length (1/100sec)            
S3  Carriage Return Char               S22 Xon Char                           
S4  Line Feed Char                     S23 Xoff Char                          
S5  Backspace Char                     S24 DSR Pulse Time (1/50sec)           
S6  Wait Time/Dial Tone (sec)          S25 Reserved                           
S7  Wait Time/Carrier (sec)            S26 RTS/CTS Delay Time (1/100sec)      
S8  Comma Time (sec)                   S27 Bit Mapped                         
S9  Carrier Detect Time (1/10sec)            1 = V21 Mode                     
S10 Carrier Loss Time (1/10sec)              2 = Disable TCM                  
S11 Dial Tone Spacing (msec)                 4 = Disable V32                  
S12 Escape Code Time (1/50sec)               8 = Disable 2100hz               
S13 Bit Mapped                              16 = Disable MNP Handshake        
      1 = Reset On DTR Loss                 32 = Disable V.42 Detect Phase   
      2 = Do Originate in Auto Answer       64 = Reserved                     
      4 = No Pause Before Result Codes     128 = Unusual SW-Incompatibility   
      8 = Do DS0 On DTR                S28 V32 Handshake Time (1/10sec)       

Strike a key when ready . . .