MTVSpool Version 2.02 Read Me File What one has received in this distribution is the single print server version of MTVSpool, a workstation based non-dedicated distributed print service for Novell NetWare 2.1 and above. MTVSpool has gone through two minor revisions (bug fixes) since being uploaded to BIX and other bulletin boards late last year. The following is a breakdown of the fixes: MTVSpool Version 2.01 - o Fixed the printer servicing routine's logic to keep it from timing out with printers which take a long time to clock data in from the parallel interface. This time-out problem caused MTVSpool to print very slowly on some printers (e.g. Panasonic KXP-1124). MTVSpool Version 2.02 - o Increased the MTVSpool's stack size to keep it from hanging the machine due to stack overflow, which was usually caused by machines which have several active interrupt driven interfaces (i.e two or more COM: ports, mouse, NIC, etc...). o Added a more robust interrupt-in-service check to allow MTVSpool to favor lower priority interrupts (MTVSpool hooks IRQ0) such as the keyboard and COM ports. o Added get/set preferred server routines to allow MTVSpool to be able to handle those instances where a user might be attached to more than one server. In addition, anyone having questions about MTVSpool may contact me via BIX Mail under the account name MVANDITTA. If one is not familiar with BIX, it is the Byte Information Exchange. The charge for BIX is a flat rate of $39.00 for a three month subscription with a $3.00 per hour telecomm charge for off-peak usage and $6.00 per hour telecomm charge for on-peak usage. If one uses BIX a lot like myself, then one may wish to register for the $20.00 per month flat rate telecomm service which allows unlimited off-peak usage. One may become a registered BIX user by calling BIX Customer Support @ (800) 227-2983. I look forward to hearing from those users who are interested in using MTVSpool.