PRODUCT  :  QUATTRO PRO                            NUMBER  :  123
VERSION  :  ALL
     OS  :  MS/PC DOS
   DATE  :  April 5, 1991			     PAGE  :  1/3

  TITLE  :  CONFIGURING QUATTRO PRO FOR A MONOCHROME
	    OR BLACK & WHITE VGA SYSTEM




Due to the nature of the the Virtual Graphics Adapter (VGA)
displays, it is impossible for Quattro Pro to automatically
detect when a Monochrome or Black & White monitor is being used.
Therefore, one of the two following setup procedures will
configure Quattro Pro for use with non color VGA displays.  Try
both of the following procedures.  One of the two will work for
your system.


	       Setting Up for a Monochrome Display

   1.  At the DOS prompt, type:  MODE MONO

   2.  Make the Quattro Pro directory the current DOS directory
       by using CD (for example, CD \QPRO if Quattro Pro is
       installed in a directory called QPRO).

   3.  Type the following command to run Quattro Pro:  Q /IM
       (or Q123 /IM if you wish to use the 1-2-3 Compatible Menu
       Tree).

   4.  If the screen goes blank at this point, press <Ctrl><X> to
       return to the DOS prompt.  You must use Setting Up for a
       Black & White Display below.

   5.  If the display comes up properly at this point, then do
       the following if using the Quattro Pro Menu Tree:

	  a.  Select:  / Options, Hardware, Screen, Screen Type,
	      J. VGA

	  b.  Select:  Quit

	  c.  Select:  Colors, Palettes, Monochrome

	  d.  Select:  Quit, Quit, Update, Quit

   6.  Do the following if using the Lotus Compatible Menu Tree:

	  a.  Select:  / Worksheet, Global, Default, Hardware,
	      Screen, Screen Type, J. VGA

	  b.  Select:  Quit












PRODUCT  :  QUATTRO PRO                            NUMBER  :  123
VERSION  :  ALL
     OS  :  MS/PC DOS
   DATE  :  April 5, 1991			     PAGE  :  2/3

  TITLE  :  CONFIGURING QUATTRO PRO FOR A MONOCHROME
	    OR BLACK & WHITE VGA SYSTEM




	  c.  Select:  Colors, Palettes, Monochrome

	  d.  Select:  Quit, Quit, Update, Quit

From now on, Quattro Pro will load properly.  If the screen goes
blank in the future when attempting to load the program, perform
the above steps again.


	     Setting Up for a Black & White Display


   1.  At the DOS prompt, type:  MODE BW80

   2.  Make the Quattro Pro directory the current DOS directory
       by using CD (for example, CD \QPRO if Quattro Pro is
       installed in a directory called QPRO).

   3.  Type the following command to run Quattro Pro:  Q /IB
       (or Q123 /IB if you wish to use the 1-2-3 Compatible Menu
       Tree).

   4.  If the screen goes blank at this point, press <Ctrl><X> to
       return to the DOS prompt.  You must use Setting Up for a
       Monochrome Display above.

   5.  If the display comes up properly at this point, then do
       the following if using the Quattro Pro Menu Tree:

	  a.  Select:  / Options, Hardware, Screen, Screen Type,
	      J. VGA

	  b.  Select:  Quit

	  c.  Select:  Colors, Palettes, Black & White

	  d.  Select:  Quit, Quit, Update, Quit


















PRODUCT  :  QUATTRO PRO                            NUMBER  :  123
VERSION  :  ALL
     OS  :  MS/PC DOS
   DATE  :  April 5, 1991			     PAGE  :  3/3

  TITLE  :  CONFIGURING QUATTRO PRO FOR A MONOCHROME
	    OR BLACK & WHITE VGA SYSTEM




   6.  Do the following if using the Lotus Compatible Menu Tree:

	  a.  Select:  / Worksheet, Global, Default, Hardware,
	      Screen, Screen Type, J. VGA

	  b.  Select:  Quit

	  c.  Select:  Colors, Palettes, Black & White

	  d.  Select:  Quit, Quit, Update, Quit

From now on, Quattro Pro will load properly.  If the screen goes
blank in the future when attempting to load the program, perform
the above steps again.